If your tub suddenly doesn’t want to drain water, the main culprit could be the problem. It’s important that you fill up your tub, but if it becomes problematic, the water will not drain at all.
Table of Contents
Can you use Drano if the tub is full of water?
As a rule, never pour Drano into an area with standing water. Good bacteria will break down organic material gradually in the drain system. You’re hurting the environment if you pour chemicals down the drain.
How much does it cost for a plumber to unclog a bathtub?
HomeAdvisor, the typical cost to clear a clogged drain is between $133 and $295, with an average cost of $201. The costs are split between parts and labor, with the latter costing between $45 and $150 an hour, depending on the professional’s skill level.
“It’s a lot of money, but it’s worth it if you know what you’re doing,” said John Hickey, a professional plumber who has worked in the industry for more than 30 years.
Why is my water not going down the drain?
Food, grease and other debris may be stuck in the pipe, causing your sink to drain slowly or not at all, because the water hits a part of your plumbing system that is not designed to handle water pressure.
If you have a sink that has been sitting for a long time, it’s possible that the pipes have become clogged with dirt and debris. If this is the case, you may need to remove the sink and replace it with a new one.
Why do plumbers say not to use Drano?
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. You’re going to be left with a plumbing system that isn’t functional if these things happen.
Is it OK to plunge a bathtub?
You can easily unclog your bathtub drain with a standard cup-style plunger, but you have to seal the overflow drain first. If your drain is clogged, you’ll need to drain the excess water out of both drains. You can do this in two ways.
The first is to use a drain plug, which is a small piece of plastic that fits into the hole in the top of a tub drain. This plug is designed to prevent water from leaking into your home. If you don’t have one of these plug-type drain plugs, then you can buy one from a plumbing supply store or a hardware store for about $1.50.
It’s important to make sure that the plug you buy is the right size for the size of drain you’re using, because it’s not uncommon for a plug to be too big for one drain and too small for another. Another way to get rid of water that’s clogging your drains is by using a vacuum cleaner.
