If you are having a drain backup in your basement, your wash tub basin, or laundry tub could be the culprit. You can easily clean the strainer on the drain inlet. A plunger can be used to clear the trap under the basin. If that doesn’t work, then you may need to use a vacuum cleaner to remove the debris.
Table of Contents
What causes a basement floor drain to back up?
The main sewer line is connected to the drain. The point at which the water is most likely to find a way out of the house is the lowest point in the home.
If you have a basement drain that backs up into the basement, you may be able to get rid of it by filling it up with water. If you do this, make sure that the water level is at least three feet above the floor. This will prevent the drain from backfilling itself.
How much does it cost to unclog a basement drain?
Depending on the hourly rates, accessibility, severity, and cause of obstruction, plumbing can cost between $75 and $550. A flat rate on basic drain cleaning is offered by most plumbing companies.
How much does it cost to snake a basement drain?
If you already have all of the tools you’ll need, you can get away with paying as little as $5 for a drain snake at the hardware store. If you don’t have any of those tools, then you’re going to have to spend a lot more money to get the job done. That’s why it’s a good idea to make sure your drain is clean before you start cleaning it.
How do you fix a backed up floor drain?
You should remove as much debris as possible by hand. The deep-down clogs can be loosened with a plunger. After 10 minutes, flush the drain with boiling water by pouring baking soda and white vinegar down the drain.
If the drain is still blocked, use a snake to get it out. Baking soda can also be used to clean the inside of a toilet bowl, but it’s best to use it on the outside of the bowl to prevent clogging.
Can you pour water down basement drain?
If the trap beneath the drain is dry, or if the plug for the cleanout is missing, you might smell something unpleasant. A missing cleanout plug can be replaced by pouring a pitcher of water down the hole.
How do you unclog a main drain without a snake?
Pour a cupful of baking soda down the drain and you’re good to go. You can pour a cupful of white vinegar down the drain. Wait for around 10 minutes for the baking soda and vinegar solution to break up and mix together. Once the mixture has broken up, you can pour the solution into a container and store it in the fridge for up to a week.
How do plumbers clear blocked drains?
The plumber inserts the hose deep down into the drain, and then high-pressure water blasts out the nozzle to clean out all parts of the drain. The pressure is enough to completely wash away all the debris that clings to the drainpipe walls.
How much does a plumber cost to unclog a drain?
Depending on the scope and severity of the problem, some plumbing projects may cost even more. You can check your drain for signs of clogging with a simple test. If the water level in the drain doesn’t rise when you try to drain it, it’s time to take a closer look at your plumbing.
