The discharge point should be at least 10 feet away from your foundation. You will need to remove the water from the soil again if you don’t. A constant flow of water damages your foundation, causes erosion, and quickly wears out the pump.
If you’re using a pump with a built-in reservoir, make sure the reservoir is large enough to hold the excess water. If it’s too small, you’ll have to fill it up with water from a nearby well, which can be expensive and time-consuming.
Table of Contents
Can I drain my sump pump into my yard?
Since discharges can’t be run into sewer or septic systems, the only option is to run them out into your yard. A good location for the discharge to exit your home and for the water to be safe to drink will be determined by a professional.
How long can a sump pump drain line be?
It’s important to remember that moderation is key and that the farther away the better.
The life of the pump will be shortened if the drainage line is more than 100 feet. If you have a large drainage system, you may want to consider using a larger pump, such as a 10-gallon bucket.
This will allow you to pump more water at a time, which will reduce the amount of water that needs to be removed from the system.
How far can sump pump push water?
Most water tables are easy to handle with the most common sized sump pump. HP sump pump can handle 7 to 10 feet vertical lift off the sump pump, a 90-degree elbow and a horizontal pipe running between the two.
How do you drain a sump pump in the winter?
Remove your sump pump’s discharge hose for the winter. When you know your area is about to experience a long period of cold weather, remove the hose connecting your sump pump to the discharge pipe and replace it with a new one.
If you have a pump that has been in service for more than a few years, you may be able to get a refund on the cost of the pump. Contact your pump manufacturer for details.
Why is my sump pump draining so much water?
It could be that the water table is too high. A frozen discharge line that’s preventing water from leaving could be a problem with the sump pump. Problems with the plumbing in your home can cause the pit to be full of water. If this is the case, you may want to contact your local plumber to see if they can fix the problem.
Can you run your sump pump into septic?
If you have a septic system, under no circumstances should the sump be pumped into the basement floor drain. The drain field of the system is usually saturated during wet conditions, which makes it difficult to handle the normal flow of water from the house. Adding to the flow with a pump can damage the drainage system and increase the risk of flooding in the future.
If your house has a basement drain, it’s important to understand that the drain is not a drain pipe. It’s a pipe that carries water to your home. If you pump water into your basement, you’re actually pumping water out of the home, not into it. Pumping the water back in is a waste of time and money, and it can cause serious problems down the road.
