The drain plug should be warm from the heated engine if you locate it under the car. Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The plug for the oil drain should open easily.
If it doesn’t, you may need to tighten the nut a bit more. If you have an aftermarket oil pan, remove the old pan and replace it with a new one. You may also want to check the oil level in your new pan to make sure it’s not too low.
Table of Contents
What size is the drain plug on a GMC Sierra?
This is the same as the M11 thread, but it is threaded on both sides of the head. It is used to drain the oil from the engine oil drain plug. If you do not have this type of thread on your engine, you will need to purchase a new one.
You can also use this thread to install an oil filter, if you don’t have a filter already installed. The threads on this filter are not as tight as those on the stock filter. For more information on oil filters, see our Oil Filters page.
Are all oil drain plugs the same size?
It’s cheaper and easier for a car maker to use the same size plug in all of their cars. M12x1 is a size marked on the surface of some oil plugs. The size of the drain plug determines how much oil can be drained from the oil pan.
The larger the plug, the more oil you can drain. If you drain too much, you’ll have to buy a new plug. This is why you should always check your oil level before draining any oil from your car.
What size is the oil pan plug bolt?
Orders over $99.00 ship Standard ground shipping. Returns must be made within 30 days of delivery. This item cannot be shipped to Alaska or Hawaii. Sorry, this item is not available for purchase.
What oil does a 5.3 Chevy take?
If your vehicle is powered by a V8 engine, it’s important to use emissions standards that are compliant with the Clean Air Act. For more information, visit the EPA’s website at www.epa.gov/cleanair.
What oil does a 2007 5.3 Chevy take?
Silverado needs an oil that is GM standard GM6094m and has a viscosity of 5W30. Synthetic oil is required for the truck. If you have an older truck that does not meet the above requirements, you may be eligible for a free oil change. Contact your local GM dealer for more information.
What kind of oil does a 2008 Chevy Silverado 5.3 take?
You should use 5w-30 motor oil for the chevy silverado. Don’t use the manufacturers recommended oil if you don’t know how much oil you need. If you are not sure of the oil you need, check your owner’s manual or contact your dealer for more information.
What kind of wrench do I need to change oil?
To loosen the drain plug, you’ll need a box wrench or socket wrench. You can probably finish the job by taking it out. If you don’t have access to a wrench, the easiest way to remove the plug is to use a flathead screwdriver to pry it off. Be careful not to break the screw, or you’ll have to buy a new one.
