The flexible cable can be moved with a power drill or a manual crank if you want to allow water to flow down the drain. Drain snakes and augers are generally safe to use, as long as you don’t over-tighten them.
If you’re using a drain snake or auger, make sure it’s not too tight. If the snake is too loose, it may not be able to reach all the way to the bottom of your drain, and you’ll have to work harder to get the water out.
Table of Contents
Why can’t I get a snake down a bathtub drain?
The answer could be that you are using the wrong type of drain snake, or that you are trying to force the snake through the pipe too quickly. The best way to get rid of a snake is to cut it off with a pair of pliers.
If you don’t have a plier, you can use a small screwdriver to pry the head off. You can also cut off the tail, but be careful not to damage the rest of the body.
How do you get a snake past the bend in the pipe?
It could be a bend or the clog causing the stoppage, and the standard procedure is to tighten the setscrew then crank the snake clockwise while applying moderate pressure. That will get you past the bend without any damage. If you’re not sure what the problem is, you can always ask your mechanic.
Can a drain snake break a pipe?
While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are coated in zinc to prevent them from corroding. Drain snakes, on the other hand, are made of copper and are not coated with zinc.
If you have a drain snake in your home, make sure that it is properly installed. If your snake is in good condition, it should not be a problem. However, if you notice that the snake has been damaged, you should contact your local snake control company to see if they can repair the damage.
What is the difference between a drain snake and an auger?
Designed to clear different types of products, plumbers consider drain snakes tools that cater to smaller drains like your kitchen or bathroom sink. The drain snake takes care of pipes ranging from 1-1/4″ to 2″ in diameter. Conversely, drain augers tackle larger pipes, such as your bathtub or shower drain.
Drain snake tools are available in a wide variety of sizes and shapes, and they come in many different materials. Some of the most popular materials include stainless steel, aluminum, brass, copper, plastic, wood, fiberglass and more.
How do you unclog a tub without a plunger?
If you don’t like using chemicals, this all-natural solution may be able to clear a bathtub drain. Put a cup of baking soda down the drain and let it sit for at least five to 10 minutes. Finally, add one tablespoon of lemon juice to the vinegar and stir until the mixture is dissolved.
