Corroded plastic drain pans may crack over time due to temperature changes, while metal pans may rust or corrode and leak at the rust spots. It is possible that improper installation is a cause of leaking pans.
Pans that have been corroded or cracked may not be able to withstand the heat of a hot water heater, which can lead to overheating and damage to the pan. If you suspect that your pan has been damaged, take it to your local hardware store to have it replaced.
Table of Contents
Can you replace AC drain pan?
If you have a secondary drain pan, it can be easy to replace it. If you have to connect anything more than the power to the unit, it’s probably best to call in a professional.
How much does it cost to replace AC drain pan?
AC drain pan costs $200 to $600, depending on the type and material. The drain pan catches the excess water dripping from the coil and sends it into the drain line to prevent condensation. If you’re replacing a condenser coil, you’ll need to replace the coil with a new one. You can do this yourself, or you can hire a professional to do it for you.
Can you put vinegar in AC drain pan?
You can prevent a clogged AC drain by performing routine cleaning. By pouring a ¼ cup of vinegar into your AC’s drain line, you will kill any mold, algae, mildew, and other forms of bacteria or fungi, preventing it from forming a buildup and causing a clog. If you want the best results, repeat this monthly.
Should there be standing water in AC drip pan?
If the water is flowing out of the drain pan, the presence of water is normal. It’s a good idea to have your drainpipe replaced if you find your drip pan full of stagnant water.
When should I replace my AC drip pan?
The older your A/C is, the more difficult it will be to find a replacement. It’s a good idea to have an older drain pan refurbished if you have a system more than 15 years old. If your system is relatively new, you should not have a problem.
How do I test my AC drain pan?
Use a flashlight to inspect the drain pan, located inside the air handler. If you see any backups or debris, check the opening of the drain line. It’s best to clean out the drain pan. You may also want to check the inside of your condenser to make sure it is working properly.
