It’s recommended that you use regular distilled white vinegar, as it increases its cleaning properties. You can use hot water and a dash of lemon juice if you find the smell of vinegar foul.
Table of Contents
Is bleach or vinegar better for AC drain line?
We recommend using vinegar instead of a bleach solution because bleach can cause corrosion if you have copper tubing in your AC’s drain line. AC flushing valve is located on the back of the AC unit and is used to flush the air out of your home’s air conditioning system.
The valve can be cleaned by soaking it in a solution of 1 cup of vinegar and 2 cups of water for 30 minutes. After the solution has been rinsed off, rinse the valve with water and dry it with a soft cloth.
How do I clean my HVAC condensate line?
If you want to flush out the drain, you can use distilled vinegar or hot water. After 30 minutes, rinse the lines with clean water and leave your solution to soak. Someone should watch the exterior exit to make sure the water moves through the system.
Does vinegar clean AC drain line?
One of the easiest ways to do this is with the use of vinaigrette. If you put a quarter of a cup of distilled vinegar into your air conditioner’s drain line, it will kill mold and other harmful organisms. It will clear up messes.
It’s a good idea to clean the drain line once a month. If you don’t want to use vinegar, you can also use baking soda. Baking soda is a mild abrasive that can be used to clean drains, but it’s not as effective as vinegar.
How often should you clean AC drain line?
Every three months you should flush your drain line. Warm water can also be used. They shouldn’t use bleach as they can damage the plastic pipes as well as break down the cement joining the pipe to the wall. If you don’t have access to vinegar, you can use a mixture of vinegar and water to clean your PVC pipe.
Mix 1 part vinegar to 3 parts water in a spray bottle. Spray the inside of your pipe with the mixture and let it sit for a few minutes. Rinse it off with clean water and repeat the process until the water runs clear.
How much vinegar do I put in my AC drain?
Remove the drain line plug and pour 14 cup of distilled vinegar into it. If you’re not careful, it may take a few hours to remove the obstruction if you’re not careful. Pour the remaining vinegar into a small bowl and add a pinch of salt.
Repeat this process until all of the water has been drained. If you don’t have a sink with a drain plug, you can use a garden hose to drain off the excess water.
Will vinegar hurt evaporator coils?
It’s going to corrode! Using bleach or vinegar can be especially risky if you think your AC drain line is clogged. If the drain line is blocked, the corrosive mixture will back up in your drain line and flow into your drain pan, which in turn can cause your water heater to burn out.
