You can keep the AC drain free of gunk by cleaning it. If you pour 14 cup of vinegar into your ac’s drain line, it will kill mold, algae, and other forms ofbacteria, preventing them from forming a build up and causing a problem. If you want the best results, repeat this monthly.
Table of Contents
Should I use bleach or vinegar to clean AC drain line?
We recommend using vinegar instead of a bleach solution because bleach can cause corrosion if you have copper tubing in your AC’s drain line. It is safe to use vinegar on carpets and clothing, but spilling bleach can ruin your carpet or clothing.
If you do not have access to a vinegar solution, you can also use a drain cleaner to clean your drain lines. You can find a variety of drain cleaners at your local hardware or home improvement store.
What is best to clean AC drain line?
The easiest way to clean drain lines is with a bit of bleach or vinegar. When you’re done cleaning your system and removing mold, you will be able to use your AC unit again.
Does vinegar corrode metal?
The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode. This also includes plastic utensils and cookware. If you have a dishwasher, be sure to rinse it thoroughly after each use. You can also use a vinegar-based cleaner to remove any residue left behind by the machine.
How often should AC drain line be cleaned?
Every three months you should flush your drain line. Warm water can also be used. They shouldn’t use bleach as they can damage the plastic pipes as well as break down the cement joining the pipe to the wall. If you don’t have access to vinegar, you can use a mixture of vinegar and water to clean your PVC pipe.
Mix 1 part vinegar to 3 parts water in a spray bottle. Spray the inside of your pipe with the mixture and let it sit for a few minutes. Rinse it off with clean water and repeat the process until the water runs clear.
Will vinegar hurt evaporator coils?
It’s going to corrode! Using bleach or vinegar can be especially risky if you think your AC drain line is clogged. If the drain line is blocked, the corrosive mixture will back up in your drain line and flow into your drain pan, which in turn can cause your water heater to burn out.
Can I put bleach in my AC drain line?
For a long time, the best way to clean the drain line was to use bleach or white vinegar with hot water. The chemicals work well in clearing the pipe. The ratio is not very high. A small amount of dirt and grime should be removed by repeating this several times. If you do not have access to a water softener, you can also use a solution of 1 part bleach to 5 parts water.
This will remove most of the dirt, but it will not remove all of it. You will need to add a little more water to the bleach solution to get it to work as well as it should. If you are not sure how much water you should add to your solution, try it out and see if it works for you.
